Triple Drums Dryer
ⅠMain Application:
Triple-drum rotary dryer is widely used in drying granule material in fixed moisture range, such as yellow ground in dry mortar industry, all kinds of molding sand in casting industry and blast furnace slag in building material/cement industry. Small size day, small granule material in chemical industry which can’t happen chemical effect, high temperature resistance and not have strict control to smoke. According to different moisture requirement for drier material in various industry. Finished product water content be able to below 1-0.5%.
ⅡMain Technical Parameters
|
Parameters Model
|
GC-3D Φ2×4.5m |
GC-3D Φ2.2×5m |
GC-3D Φ2.5×6m |
GC-3D Φ2.7×6.5m |
GC-3D Φ3×6.5m |
GC-3D Φ3.2×7m |
GC-3D Φ3.6×8m |
GC-3D Φ4.2×8m |
|---|---|---|---|---|---|---|---|---|
|
Outer tube diameter (m) |
2 | 2.2 | 2.5 | 2.7 | 3 | 3.2 | 3.6 | 4.2 |
|
Length of outer tube (m) |
4.5 | 5 | 6 | 6.5 | 6.5 | 7 | 8 | 8 |
|
Cylinder volume (m³) |
14.13 | 18.99 | 29.43 | 37.19 | 45.92 | 56.27 | 81.39 | 110.78 |
|
Cylinder speed (r/min) |
4-10 | 4-10 | 4-10 | 4-10 | 4-10 | 4-10 | 4-10 | 4-10 |
|
The maximum intake air temperature (℃) |
700-750 | 700-750 | 700-750 | 700-750 | 700-750 | 700-750 | 700-750 | 700-750 |
|
Capacity (T/h) |
13-18 | 15-23 | 20-28 | 24-33 | 35-40 | 40-60 | 55-75 | 70-120 |
|
Motor power(kW) |
5.5×2 | 7.5×2 | 5.5×4 | 7.5×4 | 11×4 | 15×4 | 18.5×4 | 22×4 |
ⅢMain Features:
- Triple-drum rotary dryer use telescope-feed structure, dry the material quickly.
- Simple design, Self-insulation, improve the heat efficiency to exceed 80%.
- Refined experience, stable operation.
- Good drying performance, coal consumption ＜8kg when drying 1 ton material.
- The fuel can be coal, oil, natural gas etc, dry mass, granule and powder material.
- Reduce land area for 50% compared to single drum rotary dryer, so construction investment is saved 50%, power consumption saved 60%.
- Finished product moisture can be adjusted depends on requirement of client.
- Lower outlet temperature, longer dust removal using life.
- Drive by tug not gear and pinion.
- Finished product temperature lower than 60℃, packing can be done continuously.
